The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
11" Rear SS4+ Deep Stage Brake System
Baer DOT4 Brake Fluid, 16.9oz

11" Rear SS4+ Deep Stage Brake System

This Drag Race Only system features four, 4-piston, S4 caliper mounted to a 11" 2 piece slot, drill, zinc plated rotor. The S4 caliper has D.O.T compliant dust and weather seals and uses the popular DR1 or HB100 pad type. Rotors are pre-assembled with NAS high grade stainless hardware. Mounting brackets and hardware are also included. The SS4+ Deep Stage system is the first drag race system designed specifically for heavy, fast cars that rely on their brake to launch or stage the car and are available in a variety of piston sizes. The larger piston area (1.75") will provide maximum clamping force, but can cause long pedal issues due to large volume requirements. A smaller 1.375" piston option is also available and has been a very popular option in classes such as NMRA True Street where the cars could see limited street use.  The 11" SS4+ Deep Stage system fits most 15” and larger wheels. This system was designed for racing only. If used on the street (due to brake bias change) be sure to spend some time to make sure adjusted correctly. 

Note: This system comes equipped with a high friction pad that is optimized for drag race applications. These pads often produce more dust and noise.

Drag Race systems come standard in Clear and Fire Red caliper colors.

| Rotor Size/Type:
11" x 1.020", 2-piece vented
| Replacement Rotor Rings:
6910354 (Left) / 6920354 (Right)

| Caliper/Piston Count/Mount Type:
S4 / 4-piston / Lug
| Replacement Pads:
DR1-N          Note: This is a high friction pad optimized for drag race applictions.
| Minimum Wheel Size:
15" (Use template to verify fitment, link below)
| System Includes:
Calipers, Brake pads, Rotor & Hat assemblies, Brackets, -3AN fittings w/ copper crush washers. Does not include brake hoses.
| Notes:
Designed to be used on Ford 9" Small Bearing housing ends with 2.5" Standoff. This system has a 5x4.5" and 5x4.75" bolt circle. Rotor center register is 2.780". Hats are drilled for 5/8" studs. Does not include park brake assembly. 
Axle flange maximum outside diameter of 5.75" is required for rotor to fit, machining is required if larger.
Many more custom colors available.  Check out our custom caliper color page click here.
Please contact us direct for additional information.
Unsure of what body code your vehicle is?

Our price: $1295.00


| Why Purchase the SS4+ Deep Stage Drag Race Systems?

  • All the benifits of our larger brake systems just in a smaller package to fit 15" wheels
  • Fits most all dual beadlock wheels
  • Designed specifically for heavy, fast cars
  • Can be used on the street
  • Calipers have dust and weather seals
  • Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High grade U281 fine thread stainless hardware (with captured nuts)
  • Systems that have hubs feature a set of 6061-T6 billet machined hubs with quality bearings installed
  • Hub systems include ARP 1/2x20 studs
  • Hubs include billet dust caps

| The S4 Caliper Features:

  • (4) 10mm cross bolts for maximum stiffness
  • Stainless steel abutments and noise suppression springs
  • Hard anodized aluminum pistons
  • Internal crossover design
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Machined logo that is hand painted
  • Uses a common 4 piston pad for easy replacements
  • Clear or FireRed Standard (custom colors available)
  • Available in Front or Rear for that same cosmetic matching look
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 100% MADE IN USA with US sourced material
Send to friend
Baer Brake Logo

Call us NOW 602-233-1411 or Contact Us