Baer Tracker Adjustable Tie Rod Ends A and F-Body

Baer Tracker Adjustable Tie Rod Ends A and F-Body

The Baer “Tracker” adjustable tie-rods feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin which. The pin is machined with the correct taper so no modification to the OE spindles is required and then heat treated. The Trackers Tie Rods are vehicle specific, mounting to the OE inner tie rod and offer approximately .875” of adjustment at the spindle to help correct bump steer issues due to modified suspensions and/or poor OE design. Best of all these are made in the USA!

| Sleeve Length:
9.700"
 
| Inner sleeve thread size:
11/16"x18 LH Thread
 
| Outer sleeve thread size:
5/8"x18 RH Thread
 
| Heim:
5/8" x 5/8" Teflon lined
 
| Applications:
1971-72 GM A-Body cars with GM B-Body spindles
1973-77 GM A-Body cars with stock spindles
1975 Pontiac Firebird with stock spindles Note: There are 2 Factory Tie Rods on the 1975 Firebird. This Tracker is for the late design with OE outer end measuring 8.750" from center of bowl to end of tie rod. 
1976-81 Pontiac Firebird with stock spindles
1980-81 Chevrolet Camaro "6 cylinder only" with stock spindles
 
| Replacement components:
Sleeve - 6250022
Pin -      6190010
Heim -   6840008
Spacers - 6260060
 
System Links:

Our price: $189.00

SKU3301013

| Why Purchase the Baer Trackers?

  • Direct bolt on upgrade
  • Fully adjustable
  • Simple installation
  • Tapered pin for NO spindle modifications
  • Vehicle specific
Send to friend