The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
14" Rear Extreme+ Brake System
Baer DOT4 Brake Fluid, 16.9oz

14" Rear Extreme+ Brake System

This system comes standard with the monoblock 6-piston, 6S caliper mounted to a 14", 2 piece slot, drill, zinc plated rotor and can be upgraded to either the XTR caliper and/or a 15" 2-piece rotor. Both the 6S and XTR calipers have dust and weather seals and uses the popular D1247 pad type. Rotors are pre-assembled with NAS high grade stainless hardware. Baer’s unique backing plate not only acts as a caliper mount, but also houses a modern 1-piece park brake shoe assembly. Stainless braided hoses are also included. The 14” Extreme+ fits most 18” or larger wheels and the 15" fits most 19" or larger wheels.

| Rotor Size/Type:
14" x 1.25", 2-piece Standard
15" x 1.25", 2-piece Optional
 
| Replacement Rotor Rings:
14" - 6910264 (Left) / 6920264 (Right)
15" - 6910312 (Left) / 6920312 (Right)
 
| Caliper/Piston Count/Mount Type:
6S Monoblock / 6-piston / Radial - Standard
XTR Monoblock / 6-piston / Radial - Optional
 
| Replacement Pads:

| Minimum Wheel Size:
18" (Use template to verify fitment, link below)
 
| System Includes:
Calipers, Brake pads, Rotors, Brackets, Park brake assembly w/cables, Stainless braided brake hoses & system hardware.
 
| Notes:
- Designed to be used with stock 1988-96 Y-Body rear knuckles and hubs
- Optional XTR caliper and R-spec rotor upgrades available  
 
| Applications:
- 1988-96 Chevrolet Corvette with OE rear knuckles and hubs
 
Many more custom colors available.  Check out our custom caliper color page click here.
 
Please contact us direct for additional information.
Unsure of what body code your vehicle is?

Our price: $3795.00

SKU4302123

| Why Purchase the Extreme+?

  • Baer’s flagship offering featuring the 1-piece Forged MonoBlock 6-piston (6S) caliper machined specifically for rear applications with smaller, yet staggered pistons, for proper brake bias and minimal pad taper
  • 2-piece rotor design with a 6061 T-6 billet aluminum hat bolted to the rotor friction ring with high grade NAS (Aircraft) hardware. Rotors comes pre-assembled
  • System includes Baer’s Verislide self-centering brackets that allow the caliper to float with the rotor/axle to prevent piston knock back
  • Fully machined billet backing plate that also holds the banksia park brake assembly
  • Standard colors are Red, Black or Silver (Custom colors and finishes also available)

| The 6S Extreme+ Caliper Features:

  • 1-piece Monoblock design machined out of a US sourced 2618 aluminum forging
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure)
  • Uses the common D1247 (DR11) race pad backing plate shared by many other competition calipers
  • Caliper can accept 13.5” to 16” rotors
  • Red, Black or Silver Powder Coat Finish (custom colors available)
  • Machined logo that is hand painted
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 100% MADE IN USA with US sourced material
Send to friend
Baer Brake Logo

Call us NOW 602-233-1411 or Contact Us