The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
13" Front Pro+ Brake System
Baer DOT4 Brake Fluid, 16.9oz

13" Front Pro+ Brake System

This system features the 6-piston, 6P caliper mounted to a 13", 2 piece slot, drill, zinc plated rotor. The 6P caliper has D.O.T compliant dust and weather seals and uses the popular D0731 pad type. Billet aluminum hubs come assembled with premium bearings packed with Redline synthetic grease and billet dust caps. Rotors are pre-assembled with NAS high grade stainless hardware. All mounting brackets, stainless braided hoses and hardware are included and comes assembled on modified spindles. The 13" Pro+ is designed to fit most 17” or larger wheels.

| Rotor Size/Type:
13" x 1.10", 2-piece
 
| Replacement Rotor Rings:
6910138 (Left) / 6920138 (Right)
 
| Caliper/Piston Count/Mount Type:
6P / 6-piston / Radial
 
| Replacement Pads:

| Minimum Wheel Size:
17" (Use template to verify fitment, link below)
 
| System Includes:
Calipers, Brake pads, Rotor & Hat assemblies, Billet aluminum hubs w/premium bearings, Billet dust caps, Modified stock spindles, Brackets, Stainless braided brake hoses and all mounting hardware
 
| Notes:
This system requires the use of an aftermarket tie rod end. Use Baer #3301013 or Moog #ES2019RL. System comes pre-assembled on stock spindles
 
| Applications:
- 1971-76 GM full size passenger cars
 
The Baer Remaster master cylinder is offered in three sizes to fit most applications. Use chart below as a guideline to help you determine the proper size for you. Please contact us with any questions regarding the best size for you.
 
Bore Size Manual Brake Power Brake Hydroboost
15/16"    
1"    
1 1/8"    
  • 15/16" can be used Power or Manual. Customers that prefer softer pedal feel with less pedal effort use 15/16" for Power Brakes
  • 1" with Power is based on good engine vacuum numbers, and that the booster is working correctly
  • Hydroboost or Drag race applications with dual rear calipers should use a 1 1/8" Bore Remaster

Click HERE for more information or to order a Remaster

Many more custom colors available.  Check out our custom caliper color page click here.
 
Please contact us direct for additional information.
Unsure of what body code your vehicle is?

Our price: $3095.00

SKU4301364

| Why Purchase the Pro+?

  • Baer’s best-selling system featuring the 6-Piston (6P) caliper
  • 2-piece rotor design with a 6061 T-6 billet aluminum hat bolted to the rotor friction ring with high grade NAS (Aircraft) hardware. Rotors comes pre-assembled
  • Includes a set of 6061-T6 billet machined hubs pre-assembled with studs and premium bearings packed with Redline synthetic grease 
  • Includes a set of modified spindles and comes pre-assembled ready for installation
  • Standard colors are Red, Black or Silver (Custom colors and finishes also available)

| The 6P Pro+ Caliper Features:

  • 6-piston, 2-piece caliper with six, 3/8” cross bolts for added strength
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure)
  • Uses the C5 and C6 backing plate (1997-2013 Corvette) or the FMSI #D731
  • Caliper can accept 13” and 14” rotors
  • Red, Black or Silver Powder Coat Finish (custom colors available)
  • Machined logo that is hand painted
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 100% MADE IN USA with US sourced material

Send to friend
Baer Brake Logo

Call us NOW 602-233-1411 or Contact Us