The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
11" Front SS4+ Deep Stage Drag Race Brake System (4-Lug)
Baer DOT4 Brake Fluid, 16.9oz

11" Front SS4+ Deep Stage Drag Race Brake System (4-Lug)

This system features the 4-piston, S4 caliper mounted to a 11" 2 piece slot, drill, zinc plated rotor. The S4 caliper has D.O.T compliant dust and weather seals and uses the popular DR1 or HB100 pad type. Billet aluminum hubs come assembled with premium bearings packed with Redline synthetic grease, ARP ½” race studs and billet dust caps. Rotors are pre-assembled with NAS high grade stainless hardware. Mounting brackets and hardware are also included. The SS4+ Deep Stage system is the first drag race system designed specifically for heavy, fast cars that might also see street use. The 11" SS4+ Deep Stage system fits most 15” and larger wheels.

Modifications to OE spindles (Not Included) is required for installation, see instructions for details (link below).

NOTE: This system comes equipped with a high friction pad that is optimized for drag race applications. These pads often produce more dust and noise.

Drag Race systems come standard in Clear or Fire Red caliper colors.

| Rotor Size/Type:
11" x 1.020", 2-piece vented
 
| Replacement Rotor Rings:
6910354 (Left) / 6920354 (Right)

| Caliper/Piston Count/Mount Type:
S4 / 4-piston / Lug
 
| Replacement Pads:
DR1-N          Note: This is a high friction pad optimized for drag race applictions.
 
| Minimum Wheel Size:
15" (Use template to verify fitment, link below)
 
| System Includes:
Calipers, Brake pads, Rotor & Hat assemblies, Billet aluminum hubs w/premium bearings, ARP studs, Billet dust caps, Brackets, -3AN fittings w/ copper crush washers. Does not include spindles or brake hoses.
 
| Notes:
Designed to be used with OE 87-93 Fox Mustang spindle.System has 4x4.25" bolt pattern. Requires spindle modification. 
 
| Applications:
- Vehicles using 1987-93 Fox Mustang spindles
 
The Baer Remaster master cylinder is offered in three sizes to fit most applications. Use chart below as a guideline to help you determine the proper size for you. Please contact us with any questions regarding the best size for you.
 
Bore Size Manual Brake Power Brake Hydroboost
15/16"    
1"    
1 1/8"    
  • 15/16" can be used Power or Manual. Customers that prefer softer pedal feel with less pedal effort use 15/16" for Power Brakes
  • 1" with Power is based on good engine vacuum numbers, and that the booster is working correctly. Manual brake cars with large piston area rear calipers (Deep Stage Calipers) may also use 1" to reduce pedal travel
  • Hydroboost or Drag race applications with dual rear calipers should use a 1 1/8" Bore Remaster

Click HERE for more information or to order a Remaster

Many more custom colors available.  Check out our custom caliper color page click here.
 
Please contact us direct for additional information.
Unsure of what body code your vehicle is?

Our price: $1095.00

SKU4261416


Why Purchase the SS4+?

  • All the benifits of our larger brake systems just in a smaller package to fit 15" wheels
  • Designed specifically for heavy, fast cars. 
  • Can be used on the street
  • Calipers have dust and weather seals
  • Proper banjo fittings (NOTE: Baer does not use any pipe thread fittings)
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High grade U281 fine thread stainless hardware (with captured nuts).
  • Includes 6061-T6 billet aluminum hubs with quality bearings, 1/2"-20 ARP studs and billet dust caps

The S4 Caliper Features:

  • (4) 10mm cross bolts for maximum stiffness
  • Stainless steel abutments and noise suppression springs
  • Hard anodized aluminum pistons
  • Internal crossover design
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Machined logo that is hand painted
  • Uses a common 4 piston pad for easy replacements
  • Clear or FireRed Standard (custom colors available)
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 100% MADE IN USA with US sourced material
Send to friend
Baer Brake Logo

Call us NOW 602-233-1411 or Contact Us