11" Front SS4+ Deep Stage Drag Race Brake System (5-Lug)

This system features the 4-piston, S4 caliper mounted to a 11" 2 piece slot, drill, zinc plated rotor. The S4 caliper has D.O.T compliant dust and weather seals and uses the popular DR1 or HB100 pad type. Billet aluminum hubs come assembled with premium bearings packed with Redline synthetic grease, ARP ½” race studs and billet dust caps. Rotors are pre-assembled with NAS high grade stainless hardware. Mounting brackets and hardware are also included. The SS4+ Deep Stage system is the first drag race system designed specifically for heavy, fast cars that might also see street use. The 11" SS4+ Deep Stage system fits most 15” and larger wheels.

Modifications to OE spindles (Not Included) is required for installation, see instructions for details (link below).

NOTE: This system comes equipped with a high friction pad that is optimized for drag race applications. These pads often produce more dust and noise.

Drag Race systems come standard in Clear or Fire Red caliper colors.

| Rotor Size/Type:

11" x 1.020", 2-piece vented

| Replacement Rotor Rings:

6910354 (Left) / 6920354 (Right)

| Caliper/Piston Count/Mount Type:

S4 / 4-piston / Lug

| Replacement Pads:

DR1-N Note: This is a high friction pad optimized for drag race applictions.

| Minimum Wheel Size:

15" (Use template to verify fitment, link below)

| System Includes:

Calipers, Brake pads, Rotor & Hat assemblies, Billet aluminum hubs w/premium bearings, ARP studs, Billet dust caps, Brackets, -3AN fittings w/ copper crush washers. Does not include spindles or brake hoses.

| Notes:

Designed to be used with OE 87-93 Fox Mustang spindle.This System has 5x4.5" bolt pattern. Requires spindle modification.

| Applications:

- Vehicles using 1987-93 Fox Mustang spindles

The Baer Remaster master cylinder is offered in three sizes to fit most applications. Use chart below as a guideline to help you determine the proper size for you. Please contact us with any questions regarding the best size for you.

Bore Size	Manual Brake	Power Brake	Hydroboost
15/16"	√
1"		√
1 1/8"			√

15/16" can be used Power or Manual. Customers that prefer softer pedal feel with less pedal effort use 15/16" for Power Brakes
1" with Power is based on good engine vacuum numbers, and that the booster is working correctly. Manual brake cars with large piston area rear calipers (Deep Stage Calipers) may also use 1" to reduce pedal travel
Hydroboost or Drag race applications with dual rear calipers should use a 1 1/8" Bore Remaster

Click HERE for more information or to order a Remaster