- Home
-
Products
- Brake Systems
-
Components
- Calipers
- Dust Caps
- General Spacers
- Master Cylinders
- Park Brake
- Plumbing
- Proportioning Valve
- Rotor Centric Rings
- Tracker Tie Rod Ends
- Wheel Studs
- Full Floater Rear Conversion
- Rotor Upgrade
- Rotor-Hat Hardware
- Service Parts
- Tracker Tie Rod Kits
- Wheel Spacers
- Braking News
- Tech Center
- Why Buy Baer
-
Galleries
Deep Stage
SS4+ Drag Spec Brake System (Front and Rear)
-
-
-
-
-
-
-
Mike Jovanis mid 8 second true street car
- Features stainless pistons, slightly heavier than aluminum pieces but transfer less heat back into the fluid.
- Dual seals (dust/weather and pressure) to meet D.O.T specifications
- Square shoulder seals as opposed to O-rings product maximum retraction for minimum drag. Eliminates the need for residual valves
- Deeper/longer pistons also prevent "cocking" in the bore. Remove the pad completely and even with the rotor at Min. thickness the piston will never fall out of the bore!
- S4 pads install from underneath the caliper, pad can never exit out of the top.
- Stainless abutment plates eliminate wear of the aluminum body and minimize pad movement and noise.
- Each S4 caliper is built to a specific rotor thickness. Baer does not use spacers between caliper halves.
- All systems with hubs come with ARP 1/2 x 20 3" race studs, and billet dust caps.
- Rear 11" will match the front SS4+ and is our smallest rear offering (no park brake).
- All 11" rotors are directionally vaned (specific left and right), better cooling and stability over straight vaned rotors.
The SS4+ front Drag Spec system was designed due to a need for a small, light weight brake for the ever growing and popular radial classes. Many customers have adapted brakes that are really designed for vehicles weight under 3000lbs to these heavier, fast cars with little luck. This system is the first of its kind designed to be used on 3200+ lb cars, and work properly! Offered for a wide variety of early domestic cars, Baer also offers direct bolt on SS4+ Drag Spec systems for late model muscle cars. Baer offers direct bolt on kits for the 2010 Camaro, SN95 Mustang (1994 - 2004), S197 Mustang (2005 - 2012) and the 1993 - 2002 Camaro (needs 1998+ spindles).
Rear SS4+ Drag Spec systems feature our unique billet caliper mount that not only locates the caliper, but also acts as a bearing retainer. The caliper bracket will have 2 positions so if you want to upgrade later to a second set of calipers an additional bracket is not required.
If you are looking for a Dual Staging (4 caliper) rear system, check out our SS4+ Dual Staging brake!
Due to all wheels being built differently Templates are always recommended to verify fitment of the brake. Templates can be found in our catalog section of the site once you search by your make and model.
| Name | SKU | Price | Thumbnail Image | Description | |
|---|---|---|---|---|---|
| Deep Stage SS4+ Front Brake System for 1982-1992 GM F-Body | 4301453FR-1982-1992-GM-F-Body | $895.00 |  |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| Deep Stage SS4+ Rear Brake System for All Ford 9 inch Early Big | 4262322C-All-All-Ford-9 inch Early Big Bearing | $695.00 |  |
Notes: 9 inch early Big Bearing 5 on 4.5 and 5 on 4.75 bolt circle. Includes one set of rear calipers. Axle flange needs to be 5.75", our standard pilot diameter is 2.780" Deep Stage Drag Racing Single Caliper rear system. Hats drilled for dual bolt cir | Product Details |
| Deep Stage SS4+ Rear Brake System for All Ford 9 inch Torino Be | 4262321C-All-All-Ford-9 inch Torino Bearing | $695.00 | |
Notes: 9 inch Torino Bearing 5 on 4.5 and 4.75 Bolt Circle. Includes one set of rear calipers. Axle flange needs to be 5.75", our standard pilot diameter is 2.780" Deep Stage Drag Racing Single Caliper rear system. Hats drilled for dual bolt circle. Can | Product Details |
| Deep Stage SS4+ Front Brake System for 1964-1972 GM A-Body | 4301451C-1964-1972-GM-A-Body | $895.00 | |
Notes: Bolts to factory spindles Deep Stage Drag Racing. No hoses, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S125A |
Product Details |
| Deep Stage SS4+ Front Brake System for 1964-1974 GM X-Body | 4301451FR-1964-1974-GM-X-Body | $895.00 | |
Notes: Bolts to factory spindles Deep Stage Drag Racing. No hoses, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S125A |
Product Details |
| Deep Stage SS4+ Front Brake System for 1970-1981 GM F-Body | 4301452C-1970-1981-GM-F-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| Deep Stage SS4+ Front Brake System for 1993-2002 GM F-Body | 4301454C-1993-2002-GM-F-Body | $695.00 | |
Notes: Designed to bolt to 1998 - 2002 Spindles and Hubs. Requires hub outside diameter to be no larger than 5.75" Deep Stage Drag Racing. No hoses, Rotors not assembled. Requires 98-02 Spindle. Hub outside diameter needs to be 5.75". Comes with 11 inc | Product Details |
| SS4+ Deep Stage Front Brake System for 1968-1969 Ford Mustang | 4261372FR-1968-1969-Ford-Mustang | $895.00 |  |
Part Number 4261372FR Fits:1968 - 1969 Ford Mustang, Front 11 inch slotted, drilled and zinc plated rotor, SS4+ Deep Stage brake system | Product Details |
| Deep Stage SS4+ Front Brake System for 1973-1977 GM A-Body | 4301452FR-1973-1977-GM-A-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| Deep Stage SS4+ Rear Brake System for All Ford 9 inch Early Big | 4262322FR-All-All-Ford-9 inch Early Big Bearing | $695.00 | |
Notes: 9 inch early Big Bearing 5 on 4.5 and 5 on 4.75 bolt circle. Includes one set of rear calipers. Axle flange needs to be 5.75", our standard pilot diameter is 2.780" Deep Stage Drag Racing Single Caliper rear system. Hats drilled for dual bolt cir | Product Details |
| SS4+ Deep Stage Front Brake System for 1965-1969 Ford Mustang | 4261371FR-1965-1969-Ford-Mustang | $895.00 | |
Part Number 4261371FR Fits:1965 - 1969 Ford Mustang, Front 11 inch slotted, drilled and zinc plated rotor, SS4+ Deep Stage brake system | Product Details |
| Deep Stage SS4+ Front Brake System for 2010-2011 GM Camaro | 4301455FR-2010-2011-GM-Camaro | $695.00 | |
Notes: Bolts to factory spindles, requires hub outside diameter to be no larger than 5.75" Deep Stage Drag Racing. No hoses, Rotors not assembled. Hub outside diameter needs to be 5.75". Comes with 11 inch rotors. | Product Details |
| Deep Stage SS4+ Front Brake System for 1975-1979 GM X-Body | 4301452C-1975-1979-GM-X-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| Deep Stage SS4+ Rear Brake System for All GM-Ford Hybrid 10-12 | 4262323FR-All-All-GM-Ford Hybrid-10-12 bolt with a Ford 3.150 Be | $695.00 | |
Notes: 10/12 bolt with Ford 3.150" bearing 5 on 4.5 and 5 on 4.75 bolt circle. Includes one set of rear calipers. Axle flange needs to be 5.75", our standard pilot diameter is 2.780" Deep Stage Drag Racing Single Caliper rear system. Hats drilled for d | Product Details |
| Deep Stage SS4+ Front Brake System for 1970-1981 GM F-Body | 4301452FR-1970-1981-GM-F-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| SS4+ Deep Stage Front Brake System for 1979-2004 Ford Mustang | 4261376C-1979-2004-Ford-Mustang | $695.00 | |
Part Number 4261376C Fits:1979 - 2004 Ford Mustang, Front 11 inch Slotted, Drilled and Zinc plated rotor, SS4+ Deep Stage brake system | Product Details |
| Deep Stage SS4+ Front Brake System for 1975-1979 GM X-Body | 4301452FR-1975-1979-GM-X-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
| Deep Stage SS4+ Rear Brake System for All GM-Ford Hybrid 10-12 | 4262323C-All-All-GM-Ford Hybrid-10-12 bolt with a Ford 3.150 Bea | $695.00 | |
Notes: 10/12 bolt with Ford 3.150" bearing 5 on 4.5 and 5 on 4.75 bolt circle. Includes one set of rear calipers. Axle flange needs to be 5.75", our standard pilot diameter is 2.780" Deep Stage Drag Racing Single Caliper rear system. Hats drilled for d | Product Details |
| Deep Stage SS4+ Front Brake System for 2005-2011 Ford Mustang | 4261377FR-2005-2011-Ford-Mustang | $695.00 | |
Notes: Bolts to factory spindles, requires hub outside diameter to be no larger than 5.75" Deep Stage Drag Racing. No hoses, Rotors not assembled. Hub outside diameter needs to be 5.75". Comes with 11 inch rotors. | Product Details |
| Deep Stage SS4+ Front Brake System for 1978-1988 GM G-Body | 4301456FR-1978-1988-GM-G-Body | $895.00 | |
Notes: Bolts to factory spindles, requires spindle modifications to install Deep Stage Drag Racing. No hoses or spindles, Rotors and Hubs not assembled. Comes with 11 inch rotors. Brake fit Template:S |
Product Details |
Find your Application
- Buick
- Cadillac
- Chevrolet
-
- C10
- Camaro
- Chevelle
- Corvette
- El Camino
- Full Size
- Impala
- Malibu
- Monte Carlo
- Nova
- Silverado
- Suburban
- Tahoe
- Trailblazer
- Chrysler
- Dodge
- Ford
-
- Crown Victoria
- Expedition
- F100
- F150
- Fairlane
- Falcon
- Galaxy
- LTD II
- Maverick
- Mustang
-
- 1965 - 1966 Rear
- 1965 - 1969 Front
- 1967 - 1973 Rear
- 1968 - 1969 Front
- 1970 - 1970 Front
- 1970 - 1973 Front
- 1971 - 1973 Front
- 1979 - 2004 Front
- 1980 - 2004 Front
- 1994 - 2004 Rear
- 2003 - 2012 Front
- 2005 - 2012 Front
- 2005 - 2012 Rear
- 2005 - 2013 Front
- 2013 - 2013 Front
- 2013 - 2013 Rear
- Ranchero
- Thunderbird
- Torino
- General Fit
- GMC
-
- Denali
- Sierra
- Yukon
- Infiniti
- Lincoln
- Mercury
- Nissan
- Oldsmobile
- Plymouth
- Pontiac
-
- Firebird
- G8
- Grand Prix
- GTO
- Tempest
- TransAm
- Ventura
- Scion
- Subaru
Want OEM replacement rotors or pads?
| ABOUT BAER, Inc. | ||
|---|---|---|
| Company Information / History Employment Opportunities 2012 Baer Catalog Sign up for our news letter |
|
|