The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu.        
14" Rear Pro+ Brake System with Park Brake
Baer DOT4 Brake Fluid, 16.9oz

14" Rear Pro+ Brake System with Park Brake

This system features the 6P 6-piston caliper mounted to a 14", 2 piece slot, drill, zinc plated rotor. The 6P caliper has D.O.T compliant dust and weather seals and uses the popular D0731 pad type. Rotors are pre-assembled with NAS high grade stainless hardware. Baer’s unique backing plate not only acts as a caliper mount, but also houses a modern 1-piece park brake shoe assembly. Stainless braided hoses are also included. The 14” Pro+ fits most 18” or larger wheels.

| Rotor Size/Type:
14" x 1.15", 2-piece
 
| Replacement Rotor Rings:
6910222 (Left) / 6920222 (Right)
 
| Caliper/Piston Count/Mount Type:
6P / 6-piston / Radial
 
| Pad Type:

| Minimum Wheel Size:
18" (Use template to verify fitment, link below)
 
| System Includes:
Calipers, Brake pads, Rotor and hat assemblies, Brackets, Park brake assemby, Stainless braided brake hoses & system hardware. System incorporates Baer's unique Verislide design allowing the calipers to float with the factory c-clip axles
 
| Notes:
Desiged to be used with 2005-14 Mustang (S197) OE 8.8" C-clip rear end. Re-uses stock parking brake cables.
 
| Applications:
- 2005-14 Mustang (SN197) with OE 8.8" C-clip rear end 
 
Many more custom colors available.  Check out our custom caliper color page click here.
 
Please contact us direct for additional information.
Unsure of what body code your vehicle is?

Our price: $2795.00

SKU4262163


| Why Purchase the Pro+?

  • Features the 6-Piston (6P) caliper machined specifically for rear applications with smaller, yet staggered pistons, for proper brake bias and minimal pad taper
  • 2-piece rotor design with a 6061 T-6 billet aluminum hat bolted to the rotor friction ring with high grade NAS (Aircraft) hardware. Rotors comes pre-assembled
  • System includes Baer’s Verislide self-centering brackets that allow the caliper to float with the rotor/axle to prevent piston knock back
  • Fully machined billet backing plate that also holds the banksia park brake assembly
  • Standard colors are Red, Black or Silver (Custom colors and finishes also available)

| The 6P Pro+ Caliper Features:

  • 6-piston, 2-piece caliper with six, 3/8” cross bolts for added strength
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad taper
  • Dual seals (dust/weather and pressure)
  • Uses the C5 and C6 backing plate (1997-2013 Corvette) or the FMSI #D731
  • Caliper can accept 13” and 14” rotors
  • Red, Black or Silver Powder Coat Finish (custom colors available)
  • Machined logo that is hand painted
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 100% MADE IN USA with US sourced material
Send to friend
Baer Brake Logo

Call us NOW 602-233-1411 or Contact Us